Latest News from WES

American Bright

American Bright

American Bright announces a new AB-FO series of Chip on Board flexible light strip. The COB light strip has a high lumen output ranging from 670 – 1200 lm/m and an efficacy range of 54 – 100 lm/W depending on the CCT. The working voltage is 24V/.5A and the power is rated at 12W. The light strip is constructed with epoxy material and is available in single color warm white, neutral and cool white .
Schaffner RB choke series

Schaffner’s RB Choke Series

Looking for an economic common-mode choke option with unique design benefits like 2- and 3- wire configurations, ruggedized saturation and thermal behavior, and straightforward pin-out for easy PCB design? Schaffner’s RB choke series has your solution. Learn all about this versatile choke series in part one of “EMC/EMI Filter Design with RB Common-Mode Chokes,” a two-part application note. Find out how the RB series can make your design process easier and your time to .
EMC-EMI Filter Design

EMC/EMI Filter Design

In “EMC/EMI Filter Design with RB Common-Mode Chokes: Part 1”, we outlined the unique design benefits of the Schaffner RB choke series, and how to apply them to your EMC/EMI filter design. In Part 2 of this whitepaper, you will learn a theoretical approach to estimating the amount of EMC noise that will occur, and how to use that amount to determine appropriate filter component values. Download “EMC/EMI Filter Design with RB Common-Mode Chokes: .
Power Cords

How Power Cords Are Tested?

Do you know how power cords are tested? Check out our link below from Mega Electronics. They are open and shipping can we get you a quote? # #electricaltesting #manufacturersrep #megaelectronics https://lnkd.in/eEiy3U3
S-Tek

S-Tek Inc. Display Technology

Proud to Rep such a great company hashtag#stekinc “Whether you’re designing a complicated multi-interface or something a little more simple, attention to the details gets you the kind of results that our customers have come to expect – “extraordinary”. S-Tek Inc. display technology services cover from concept to production ready scenarios and everything in between. We pride ourselves on quick and accurate communications that drive results quickly and efficiently, striving all the time to .
Overmolding

WHAT IS OVERMOLDING, AND WHY IS IT IMPORTANT?

Simply put, overmolding is an injection molding process in which two or more materials are used to combine the wire and connector to create a single part. To do this, the cable assembly is placed inside a mold. The first material (the substrate) is covered by the other materials in this process. The overmolding process requires a rigid plastic component to be overlaid with a TPU layer or other overmold materials using either the .
employ EMC/EMI filters

Minimizing EMI in Complex Electronic Systems

The increasing use of complex electronic systems in factories has optimized operations and output…but these systems are much more susceptible to electronic interference than older technology. Minimizing EMI is a priority in many facilities, as these systems in modern factory environments generate and can be disrupted by electronic interference. What’s the solution? EMC/EMI filters lower EMI without significantly impacting the cost, size, or function of factory automation systems and robotics. Learn how in our .